WELCOME TO IPT, INC., PRODUCTS FOR THE STONE CARE PROFESSIONAL

Instructions for Marble Wax and Polish Protector

MW 1600 Hardrock Marble Wax

Hardrock Paste Wax is a special formula which will produce a high shine, enhance the color, and provide a protective seal to help prevent staining and the severity of etching caused by acid based products.

Directions

Note: This product will dry to a hard, clear finish in 10 to 20 minutes. Apply to an area small enough to finish within this period.

1. Apply a thin, even coat to the surface with a clean, soft cloth. Allow to dry 3 to 5 minutes and buff with a dry, soft cloth. For maximum shine and protection apply three or more coats. If the wax becomes hard to buff out, buff the area briskly with fine steel wool followed immediately with a soft cloth.
2. To increase the hardness and shine, buff out each coat with a power buffer using a lambs wool polishing pad.
   
   
   
   

PP1659 Hardrock Polish Protector

(Aerosol Spray)

To Clean and Protect: Spray on to the surface to be cleaned and protected.  Allow to stand 15 or 20 seconds and then buff dry with a clean soft, cloth or towel.  Tor maximum protection repeat three (3) times.

To Maintain:  Re-apply one coat as needed to clean & protect the stone