WELCOME TO IPT, INC., PRODUCTS FOR THE STONE CARE PROFESSIONAL

Instructions for Hardrock Stone Polishing Compound

PC1010, PC1025

Equipment Needed

1. 175 to 300 RPM Floor Machine

2. Hardrock Stone Polishing Compound

3. Hog hair or red buffing pad

4. Easy Mask Tape or Pre-taped drop Cloth

5. Wet vac, mop, bucket, sponge, rags, etc.

Directions

1. Plan to polish sections of a maximum of 10 to 15 square feet at a time.

2. Lightly wet an area about the diameter of the buffing pad with water.

3. Spread approximately two heaping tablespoons of the compound in the wetted area.

4. Buff the desired area with the buffing pad. Stop and check the floor periodically to see if the desired shine has been achieved.

5. Once desired shine has been achieved, rinse the area with clean water, wet vac off excess slurry, and damp mop with Hardrock No-Rinse Neutral Cleaner.