WELCOME TO IPT, INC., PRODUCTS FOR THE STONE CARE PROFESSIONAL

[Image]

Hardrock Cleanstone

KS3000 Cleanstone

Description

Hardrock Cleanstone will remove yellowish, orange, or copper color rust stains and deep seated dirt and grime from grout, marble, limestone, and other calcium based natural stone surfaces. This product is effective only on externally caused stains at the outer surface. It will not remove stains or discolorations coming from the inside out.

Instructions

CAUTION: Do no use this product on granite, ceramic tile, porcelain or glass. It will etch these materials.

  1. Patch Test: Always test this product in a small, out of the way area to verify the suitability of use on your particular surface before proceeding with application to a large area.

  2. Precautions:- Always wear rubber or latex gloves. Prolonged contact with the skin may cause irritation

  3. Application: Apply full strength with a mop, brush, roller or rag. Let stand 5 to 10 minutes and agitate the area with a soft bristle brush. Rinse the area thoroughly with clean water. Note: when used on a polished stone, do not allow to dry on the surface. This may cause a slight hazy or dull appearance.

  4. Repeat: If the stain is not removed completely, repeat step #3 and/or increase the amount of time you leave the solution on the surface before agitation.